OUR EQUIPMENT

Geoprobe 8040DT

PeneCore Drilling’s Geoprobe 8040DT provides our clients with the ability to complete challenging projects using Direct Push and Hollow Stem Auger like never before.

The Geoprobe 8040DT is equipped with a powerful GH80 hammer capable of driving 2.25” up to 6” direct push casing. We can collect continuous core samples up 3” in diameter and install 2” PrePack wells using our DT45 Dual-tube System.

As a full functioning Hollow Stem Auger rig the 8040DT can drill and install wells up to 6” in diameter while collecting SPT samples using the Automatic  Drop Hammer.

Please contact us to learn more about our Geoprobe 8040DT and its unrivaled capabilities

.


Geoprobe 7822DT (2 Rigs) Capabilities

  • Direct Push Technology
  • Hollow Stem Auger
  • Soil Gas
  • Remedial Injection
  • Limited Access

Dimensions Length: 10′ Width: 5′ Weight: 7555 lbs The Geoprobe 7822DT Combo Rig is a high-capacity direct push machine with a narrow platform for limited access areas and a sufficient stroke for added work space under the hammer.

http://geoprobe.com/7822dt

Geoprobe 6600 & 5400 Limited Access Rigs (2 Rigs) Capabilities

  • Direct Push TechnologyUntitled-7
  • Hollow Stem Auger
  • Soil Gas
  • Remedial Injection

Limited Access Rig Dimensions Width: 34″ Overhead Height: 7′

This probe is a versatile and rugged probing machine designed for accomplishing the majority of our probing tasks. Direct push rig accepts most Geoprobe rods and tooling. This rig is great for the collecting shallow surface soil, vapor, and water samples where the power of rig is not needed. The drill features a 54-in. stroke and 25,000 lb. of pulling capacity for subsurface work. Lateral movement of the unit provides for offset placement of the probe without moving the carrier vehicle. A heavy-duty steel frame and dual extend tubes add stability to probing operations.
The driller is typically anyone available


 Geoprobe 6712DT

The 6712DT Track mounted Rig combines the strengths of the 6610DT (such as its Size and Cost Effectiveness) with creature comforts previously only seen in larger machines. It breaks into 3 separate components for easy travel overseas, it is Heli-Portable, and is a snap to put back together again http://geoprobe.com/6712dt

Geoprobe 6610DT

The 6610DT is capable of conducting Concrete Drilling, Soil, Vapor, Groundwater Sampling and well installations. The 6610DT System is equipped with GH60 Hammer that supply up to 47,000 Lbs. of pulling capacity and 35,000 lbs of down force.


Geo Probe 420M Limited Access Rig Capabilities:

  • Soil Sampling geoprobe_420m_gategeoprobe_420m
  • Soil Gas Sampling
  • Ground Water Sampling
  • Dimensions: Width 19″ Working Height 94″

 This powerful little machine was designed specifically to be durable yet as lightweight as possible. At 23 in. wide, 62 in. tall (folded), and weighing less than 425 lb., the 420M can be manually lifted and carried to remote sampling locations. It can also be deployed to hard-to-reach and narrow sampling locations. The 420M is powered by a remote hydraulic power source (sold separately) which easily attaches to the machine or by using the auxiliary hydraulics from other Geoprobe® machines.


CME -85 Capabilities:

  • Up to 12″ Borehole,
  • Well Installations up to 4″

Penecore Drilling offers hollow stem auger drilling services with our CME 85 drill rig. We have the capability to drill:

  • geotechnical sampling
  • environmental sampling
  • well installations
  • well abandonment
  • continuous core samples

Capable of spinning 4 ¼” – 10 ¼” Hollow Stem Augers to hundreds of feet through less than ideal soils, this machine is perfect for geotechnical borings, monitoring well installations of all sizes, setting of casing, bedrock coring, drive and wash, DTH and air-hammering work. This is one rugged machine that will get the job done, safely, efficiently and with limited site interference and is recommended for nearly any soil conditions.

http://cmeco.com/drills/truck-mounted-drills/cme-85-truck-mounted-auger-drill/


CME -75CME75 Capabilities:

  • Up to 12″ Borehole,
  • Well Installations up to 4″

Penecore Drilling offers hollow stem auger drilling services with our CME 75 drill rig. We have the capability to drill:

  • geotechnical sampling
  • environmental sampling
  • well installations
  • well abandonment
  • continuous core samples

Capable of spinning 4 ¼” – 10 ¼” Hollow Stem Augers to hundreds of feet through less than ideal soils, this machine is perfect for geotechnical borings, monitoring well installations of all sizes, setting of casing, bedrock coring, drive and wash, DTH and air-hammering work. This is one rugged machine that will get the job done, safely, efficiently and with limited site interference and is recommended for nearly any soil conditions.

http://cmeco.com/drills/truck-mounted-drills/cme-75-truck-mounted-auger-drill/


VacMasters 4000 Self contained truck mounted unit

  • 1000 CFM Vacuum and 165 CFM @ 185 PSI at the lancevacmaster_rev600x400
  • Funnels all cuttings thru air filters minimizing dust
  • Temporarily stores cuttings until hole is cleared in 200 gallon storage tank
  • Remote controlled hydraulic soil dumping mechanism
  • Remote shut off system
  • Equipped with air tools
  • 110 gallon water tank for injection, saw cutting, or clean up
  • Water injection pump to supplement air for difficult soil conditions
  • Injection pump is rated at 3000 PSI @ 3 GPM
  • Equipped with saw cutter, jack hammer, & tamper
  • Tow along trailer holds drums and any materials if needed
  • Capable of installing shallow wells
  • Flashing beacon and traffic lights for street or night work

Untitled-5 Pressure Grout Rigs (2 Rigs)Untitled-6

  • Grout Pumps
  • Grout Mixers
  • Air Compressor
  • Water Storage Tanks
  • Secondary Containment
  • Flow and Pressure Regulators

220 N. East Street Woodland, CA, USA 95776                                                                                       Mon. to Fri. 9am to 5pm

Copyright 2018 | All Rights Reserved | Cornerstone IT Solutions